Description
THE BEST ALL-PURPOSE CLEANER & DEGREASER
A to Z is an environmentally-friendly, biodegradable multi-purpose cleaner that can be used on virtually any surface to remove black mold, decades of dirt, oil, grease, grime, and oxidation. A to Z is perhaps the most effective cleaner on the market. Nonetheless, it is safe to use and safe to use around plants and pets.
HOW IT WORKS:
A to Z is a concentrated water-based formula that dissolves and lifts years of build up. Depending on the challenge of your project, start by using A to Z at full strength in an inconspicuous area. Allow A-to-Z to dwell for 5-10 seconds and wipe away. If A to Z does not effectively remove the stain or grime, repeat application, allowing more dwell time. Some applications may require up to a 20 minute dwell time.
If the stain or grime is easily removed in the initial 5-10 second test, consider diluting A to Z with water to extend the coverage of the product. For this reason, A to Z can be “dialed in” to suit your specific application, creating the most cost-effective cleaner available. A to Z can be cut up to 20 times with water and used for window cleaning.
A to Z does not contain bleach. Therefore, it may not remove some forms of black mold discoloration.
Stubborn build up may require agitation with a brush to loosen the buildup, allowing A to Z to penetrate to the substrate.
USES:
- Removes mold from wallboard and other surfaces
- Prepares surfaces for painting by removing dirt and oxidation
- Brightens existing painted surfaces by removing years of oxidation
- Removes black streaks (tiger stripes) from aluminum gutters
- Cleans Encore and other wood and concrete coatings
- Removes gum from concrete surfaces
- Cleans pool deck surfaces
- Removes suntan oil discoloration/stains from paved and pool deck surfaces
- Cleans composite decking
- Cleans wood decking
- Cleans pool deck furniture
- All-purpose boat cleaner, vinyl, decking, aluminum siding, fiberglass, etc.
- Removes oil & grease from restaurant floors
- Removes black streaks from RVs, motor homes, trailers, etc.
- Cleans automotive engines
- Cleans flat membrane roof surfaces
- Cleans years of dirt and grime from hardwood floors
- Deep cleans auto leather
plus hundreds of other possible uses!
EXAMPLES OF DWELL TIME AT FULL CONCENTRATION:
- Removing mold from wall board: 10-15 seconds
- Removing oxidation from vinyl siding: 5-10 seconds
- Removing black streaks from aluminum siding: 15 seconds
- Removing stubborn buildup from hardwood floors: 30-45 seconds
- Removing suntan oil stains from walking surfaces: 90 seconds
- Removing oil and grease from restaurant floor: 10-15 minutes
Note: Users can cut their material costs by 50% by diluting the cleaner by 2:1 and extending the dwell time.
A-to-Z can also be applied through the downstream injection system of pressure washers.
COVERAGE OF UNCUT/UNDILUTED GALLON: 100 to 1,000 square feet per gallon depending on porosity of the substrate.
WARNING: THIS PRODUCT CUTS OIL (PETROLEUM). THEREFORE, DO NOT APPLY TO ASPHALT SHINGLE ROOFS OR OTHER PETROLEUM-BASED SURFACES, E.G. – ASPHALT SURFACES, AS DOING SO COULD HARM THE SURFACE.
USED IN HEAVY CONCENTRATION, AND LEFT TO DWELL, THIS PRODUCT MAY HARM OR REMOVE SOME FINISHES. ALWAYS TEST TO ENSURE PROPER CONCENTRATION AND DWELL TIME BEFORE USING TO CLEAN AN AREA.
PLEASE READ SAFETY DATA SHEET
